EWIS TG 7 & 8 Continuation

The aviation industry is continuously improving when it comes to safety.

As bad as it is, lessons are learned with every incident or accident, big or small. The cause of it is analyzed and procedures are drawn up or changed on the basis of this. One of the results of such an analysis can be that there is a need for training, to create or increase awareness for a certain matter for example. One such training is EWIS.

Following EWIS continuation training is set mandatory by the aviation authorities. If you don’t follow this course, you won’t be allowed to practice your passion anymore: working on the Aircraft.

This continuation training is custom made to meet the requirements given by the aviation authorities for Target Group 7 and 8.

The training consist of the following modules:

• Module A: General EWIS Practices.
• Module C: Inspections.
• Module D: Housekeeping.
• Module E: Wire.

Detailed Learning Objectives and Topic Overview per Module

---

Module A: General EWIS Practices

Learning Objectives:

• Know the safety procedures of normal and non-normal maintenance procedures so that the person can protect himself/herself and the aeroplane.

Detailed Topic Overview:

1. Safety Practices
   • Current is lethal – first aid
   • Applying power to the aeroplane
   • Isolating the circuit
   • Aeroplane warnings
   • Human factors

---

Module C: Inspections

Learning Objectives:

• Know the effects of fatigue and complacency during inspection and how to combat these effects (human factors).
• Recognize typical wiring system damage, such as hot gas, fluid contamination, external mechanically induced damage, chafing, corrosion, signs of overheating of wire, wire bundles, connective and control device assemblies.

Detailed Topic Overview:

1. Human factors in inspection
   • Fatigue
   • Complacency
2. Wiring system damage
   • Swarf/FOD/metal shavings
   • External mechanically induced damage
   • Hot gas
   • Fluid contamination
   • Vibration/chafing
   • Corrosion
   • Signs of overheating

---

Module D: Housekeeping

Learning Objectives:

• Recognize external contamination and other damage due to external environmental conditions.
• Know the aeroplane internal contamination sources so that inspection processes can be effectively carried out and contamination damage easily recognized.
• Recognize other possible contamination sources.

Detailed Topic Overview:

1. Aeroplane external contamination sources
   • De-ice fluids
   • Water and rain
   • Snow and ice
   • Miscellaneous (e.g. Cargo/beverage spillage)
   • Air erosion
2. Aeroplane internal contamination sources
   • Hydraulic oils
   • Engine and APU oils
   • Fuel
   • Greases
   • Galleys and toilets
   • Lint/dust
   • Bleed air and hot areas
   • Hazardous materials
3. Other contamination sources
   1. Paint
   2. Corrosion inhibitor
   3. Drill shavings/swarf
   4. Foreign objects (screws, washers, rivets, tools, etc.)
   5. Animal waste

---

Module E: Wire

Learning Objectives:

• Know typical damage that can be found.

Detailed Topic Overview:

1. Typical damage and areas found
   • Vibration
   • Heat
   • Corrosion
   • Contamination
   • Personnel traffic passage

---